13: Maintenance
SLC™ Console Manager User Guide 234
Status/Reports
On this page, you can view the status of the SLC ports and power supplies and generate a
selection of reports.
Note: Status and statistics shown on the web interface represent a snapshot in time. To
see the most recent data, you must reload the web page.
1. Click the Maintenance tab and select the Status/Reports option. The following page
displays:
Figure 13-9 Maintenance > Status/Reports
The top half of the page displays the status of each port, power supply, and power outlet:
- Green indicates that the port connection or power supply is active and functioning
correctly.
- Red indicates an error or failure or that the device is off.
2. Select the desired reports to view under View Report:
View Report
All Displays all reports.
Port Status Displays the status of each device port: mode, user, any related connections,
and serial port settings.
Port Counters Displays statistics related to the flow of data through each device port.
To Next Page
Loading...
Need help?
General