14: Application Examples
SLC™ Console Manager User Guide 248
4. Log into the SLC console manager.
5. Connect to the SUN UNIX server using the connect direct command.
6. Use the escape sequence to escape from direct mode back to the command line interface.
Local Serial Connection to Network Device via Telnet
Figure 14-4 shows a terminal device connected to the SLC console manager device port 2, and a
SUN server connected over the internet to the SLC device. When a connection is established
between the device port and an outbound Telnet session, users can access the SUN server as
though directly connected to it. (See Chapter 11: Connections for more information).
Figure 14-4 Terminal Device Connection to the SLC Console Manager
CONNECT 57600
Welcome to the SLC
login: sysadmin
Password:
Welcome to the SLC Console Manager
Model Number: SLC 48
For a list of commands, type 'help'.
[SLC]>
[SLC]> connect direct deviceport 2
SunOS 5.7
login: frank
Password:
Last login: Wed Jul 14 16:07:49 from computer
Sun Microsystems Inc. SunOS 5.7 Generic October 1998
SunOS computer 5.7 Generic_123485-05 sun4m sparc SUNW,SPARCstation-20
$
To Next Page
Loading...
Need help?
General