15: Command Reference
SLC™ Console Manager User Guide 300
Description
Sets whether remote users who are not part of the remote user list will be authenticated.
show remoteusers
Syntax
show remoteusers
Description
Displays settings for all remote users.
Routing Commands
set routing
Syntax
set routing [parameters]
Parameters
rip <enable|disable>
route <1-64> ipaddr <IP Address> mask <Netmask> gateway <IP
Address>
static <enable|disable>
version <1|2|both>
Note: To delete a static route, set the ipaddr, mask, and gateway to 0.0.0.0.
Description
Configures static or dynamic routing. To delete a static route, set the IP address, mask, and
gateway parameters to 0.0.0.0.
show routing
Syntax
show routing [sort <destination|iface>] [display <IP Address>]
[resolveip <enable|disable>] [email <Email Address>]
Description
Sets the routing table to display IP addresses (disable) or the corresponding host names (enable).
You can email the displayed information.
Script Commands
set script delete
Syntax
set script delete <interface|batch> name <Script Name>
To Next Page
Loading...
Need help?
General