13: Maintenance
SLC™ Console Manager User Guide 239
Events
On this Maintenance > Events page, you can define what action you want to take for events that
may occur in the SLC console manager.
1. Click the Maintenance tab and select the Events option. The following page displays:
Figure 13-13 Maintenance > Events
2. Enter the following:
Event Trigger From the drop-down list, select the type of incident that triggers an event. Currently,
the options are:
Receive Trap
Temperature Over/Under Limit (for Sensorsoft devices)
Humidity Over/Under Limit (for Sensorsoft devices)
Device Port Data Drop
Curent Over Threshold
Note: Certain event triggers are available on some SLC and SLB models.
Action From the drop-down list, select the action taken because of the trigger. For
example, the action can be writing an entry into the syslog with details of the event
or sending the trap(s) to the Ethernet or modem connection.
Ethernet For actions that require an Ethernet connection (for example, Forward All Traps to
Ethernet), select the Ethernet port to use.
To Next Page
Loading...
Need help?
General