To Next Page

To Previous Page

SLC™ Console Manager User Guide 340

Appendix I: LDAP Schemas

This appendix describes the procedure for defining individual user permissions from a Windows

Active Directory (AD) server to use with the SLC console manager firmware version 5.4 or greater.

The procedure outlined in this appendix is based on Windows Server 2003 and 2008 and can vary

with other Windows versions.

Note: In this appendix, the terms “rights and permissions” are used interchangeably.

This appendix contains the following sections:

 Installing Schema Support in Window AD Server

 Creating the SLC Schema Attribute

 Adding the Attribute to the Users Group in Windows

 Adding the Permissions to the Individual User

 Values to Use

 String Format

Installing Schema Support in Window AD Server

To install schema support in a Windows AD server for the SLC console manager, follow the steps

contained in the document at http://technet.microsoft.com/en-us/library/cc731628.aspx

Or perform the following steps that were copied from the website above.

1. Open a command prompt and type regsvr32 schmmgmt.dll.

2. Press Enter. Figure I-1 shows the window that displays.

Lantronix SLC8 User Manual

Other manuals for Lantronix SLC8