15: Command Reference
SLC™ Console Manager User Guide 309
Description
Configures the SLC console manager to use TACACS+ to authenticate users who log in via the
Web, SSH, Telnet, or the console port.
show tacacs+
Syntax
show tacacs+
Description
Displays TACACS+ settings.
Temperature Commands
set temperature
low <Low Temperature in C. or F.>
high <High Temperature in C. or F.>
calibrate <Temperature Calibration in C. or F.|cancel>
Syntax
set temperature low <Low Temperature in C> high <High Temperature in C>
Description
Sets the acceptable range for the internal temperature sensor (an SNMP trap is sent if the
temperature is outside of this range).
show temperature
Syntax
show temperature
Description
Displays the acceptable range and the current reading from the internal temperature sensor.
USB Commands
set usb access
Syntax
set usb access <enable | disable>
Description
Enables or disables access to USB devices.
set usb modem
Syntax
set usb modem <U1> <parameters>
To Next Page
Loading...
Need help?
General