15: Command Reference
SLC™ Console Manager User Guide 304
To create or edit a site:
set site add|edit <Site Name> [<parameters>]
Parameters:
name <Site
Name> (ed
it only)
dia
loutnumber
<Phone Nu
mber>
deviceport <Device Port # or Name or none> dialoutlogin <User Login>
usbport <U1
|U2>
dia
loutpasswor
d <Passwo
rd>
auth <pap|chap> allowdialback <enable|disable>
pccardslot <upper|lower> loginhost <User Login/CHAP Host>
dialbacknum
ber <Phon
e Number>
cha
psecret <CH
AP Secret
>
dialbackdelay <Dial-back Delay> localipaddr <negotiate|IP Address>
dialbackretries <1-10> remoteipaddr <negotiate|IP Address>
timeoutlogins <disable|1-30 minutes> routeipaddr <IP Address>
modemtimeout <disable|1-9999 secs> routemask <Mask>
restartdela
y <PPP Restar
t Delay>
routegat
eway <Gateway>
cbcpnocallback <enable|disable> nat <enable|disable>
To delete a site:
set site delete <Site Name>
show site <all|names|Site Name>
The following list includes options which accept the CLEAR command:
CLEAR must be in all caps.
SLC Network Commands
set slcnetwork
Syntax
set slcnetwork <parameters>
Parameters
add <IP Address>
delete <IP Address>
search <localsubnet|ipaddrlist|both>
Description
Detects and displays all SLC console manager or user-defined IP addresses on the local network.
show slcnetwork
Syntax
show slcnetwork[ipaddrlist <all|Address Mask>]
Description
Detects and displays all SLC console managers on the local network. Without the ipaddrlist
parameter, the command searches the SLC network. With the ipaddrlist parameter, the
set sites loginhost, chapsecret, dialoutlogin, dialoutpassword,
dialbacknumber
To Next Page
Loading...
Need help?
General