12: User Authentication
SLC™ Console Manager User Guide 195
Figure 12-8 User Authentication > TACACS+
2. Enter the following:
Enable TACACS+ Displays selected if you enabled this method on the User Authentication page. If
you want to set up this authentication method but not enable it immediately, clear
the checkbox.
You can enable TACACS+ here or on the first User Authentication page. If you
enable TACACS+ here, it automatically displays at the end of the order of
precedence on the User Authentication page.
TACACS+ Servers 1-3 IP address or host name of up to three TACACS+ servers.
Secret Shared secret for message encryption between the SLC console manager and
the TACACS+ server. Enter an alphanumeric secret of up to 127 characters.
Encrypt Messages Select the checkbox to encrypt messages between the SLC unit and the
TACACS+ server. Selected by default.
Custom Menu If custom menus have been created (see the User Guide), you can assign a
default custom menu to TACACS+ users.
To Next Page
Loading...
Need help?
General