Lantronix SLC8 User Manual

12: User Authentication
SLC™ Console Manager User Guide 200
3. Select or clear the checkboxes for the following rights:
Data Ports
The ports users are able to monitor and interact with using the
connect direct
command. Enter the port numbers or the range of
port numbers (for example, 1, 5, 8, 10-15). U1 denotes the USB port on
the front of the SLC console manager. For SLC/SLB models with an
internal modem, U2 denotes the internal modem.
Clear Port Buffers
The ports whose port buffer users may clear using the
set
locallog clear
command.
Enable for
Dial-back
Select to grant a user. Users with dial-back access can dial into the SLC
unit and enter their login and password. Once the SLC device
authenticates them, the modem hangs up and dials them back. Disabled
by default.
Dial-back Number The phone number the modem dials back on depends on this setting for
the device port. The user is either on a fixed number, or on a number that
is associated with the user’s login (specified here).
Escape Sequence A single character or a two-character sequence that causes the SLC
console manager to leave direct (interactive) mode. (To leave listen
mode, press any key.)
A suggested value is Esc+A (escape key, then uppercase "A" performed
quickly but not simultaneously). You would specify this value as \x1bA,
which is hexadecimal (\x) character 27 (1B) followed by an A.
This setting allows the user to terminate the
connect direct
command on the command line interface when the endpoint of the
command is deviceport, tcp, or udp.
Break Sequence A series of one to ten characters users can enter on the command line
interface to send a break signal to the external device. A suggested
value is Esc+B (escape key, then uppercase “B” performed quickly but
not simultaneously). You would specify this value as \x1bB, which is
hexadecimal (\x) character 27 (1B) followed by a B.
Custom Menu If custom menus have been created you can assign a default custom
menu to the group. See Custom Menus for more information.
Display Menu at Login Check the checkbox to display the menu at login.
Full Administrative Right to add, update, and delete all editable fields.
Networking Right to enter network settings.
Services Right to enable and disable system logging, SSH and Telnet logins,
SNMP, and SMTP.
Secure Lantronix
Network
Right to view and manage Secure Lantronix units (e.g., SLP, Spider, or
SLC units) on the local subnet.
Date/Time Right to set the date and time.
Local Users Right to add or delete local users on the system.
Remote Authentication Right to assign a remote user to a user group and assign a set of rights
to the user.
SSH Keys Right to set SSH keys for authenticating users.
User Menus Right to create or edit a custom user menu for the CLI.
Web Access Right to access Web-Manager.
Diagnostics & Reports Right to obtain diagnostic information and reports about the unit.
Reboot & Shutdown Right to use the CLI or shut down the SLC device and then reboot it.

Lantronix SLC8 Specifications

General

Brand	Lantronix
Model	SLC8
Category	Server
Language	English