12-6 Passport 12/Passport 8 Operator’s Manual
12.7 Changing NIBP Settings
By selecting the NIBP parameter window, you can enter the [NIBP Setup] menu.
12.7.1 Setting the Initial Cuff Inflation Pressure
You can set the initial cuff inflation pressure manually. In the [NIBP Setup] menu, select [Initial Pressure] and then
select the appropriate setting.
NOTE
For known hypertensive patients, you need to set initial cuff pressure to a higher value to reduce the
measurement time.
12.7.2 Setting NIBP Alarm Properties
Select [Alarm Setup >>] from the [NIBP Setup] menu. You can set the alarm properties for this parameter in the popup
menu.
12.7.3 Displaying NIBP List
Select [Screens] QuickKey→[Screen Setup]. You can set [NIBP List] to be displayed on the screen, where the most
recent NIBP measurements display. Then, multiple sets of most recent NIBP measurements will be displayed. And the
displayed PR is derived from NIBP.
You can not display NIBP list in some screens such as the big numerics screen.
12.7.4 Setting the Pressure Unit
Select [Unit Setup >>] from the [User Maintenance] menu. In the popup menu, select [Press. Unit] and then select
[mmHg] or [kPa].
12.7.5 Switching On NIBP End Tone
The monitor can issue a reminder tone at the completion of NIBP measurement. The NIBP End Tone is off by default. You
can switch it on by accessing the [NIBP Setup] menu.
To Next Page
Loading...
Need help?
General
