Download to NV-RAM from SD card
System Maintenance Section 8-3 D146/D147/D148/D149/D150
loading NV-
Data
8.3 DOWNLOAD TO NV-RAM FROM SD CARD
When download fails due to a fault with the NV-RAM card, or a fault with the communication line
between the controller <=>BCU(s), repeat the download. If still not successful, manually enter the
SP/UP preset value based on the SMC print outputted previously.
1. When the power is OFF, set the SD card containing NV-RAM data in the SD card slot (for
service), and switch the power ON.
2. Go into SP5-825-001 (NV-RAM contents download).
3. Press key [1] under conditions where execution is possible.
* When there is a nv file corresponding to a machine model number, it is downloaded. When
the model number is not correct, it is not downloaded.
§ Data except for download target
§ Total counters
§ C/O, P/O counters
§ Accounting counters for default settings counter display
§ Copy option setting by customer support system
To Next Page
Loading...
Need help?
General
