Copy Data Security Unit Type G
SM 2-161 D146/D147/D148/D149/D150
2.29.3 SETTINGS (TO BE DONE BY THE USER)
Equipment administrator settings
In order to validate administrator authentication, select [YES] in administrator authentication
management settings. When the setting is validated, the initial-setting item currently assigned to
each administrator will be the administration item.
1. Press the [Default setting/counter] key.
2. Press the [System default setting] button.
3. Press the [Administrator settings] button.
4. Press the [Next] button.
5. Press the [Administrator authentication management] button.
To Next Page
Loading...
Need help?
General
