Internal Finisher SR3130
D146/D147/D148/D149/D150 2-122 SM
2.19.2 INSTALLATION PROCEDURE
§ Removal of stabilizers must always be with the consent of the customer. Do not remove
them at your own judgment.
§ When you install this option, turn off the power to the machine, and unplug the power
plug from the wall socket.
§ If it is installed with the power on, it will result in an electric shock or a malfunction.
§ Cannot be used together with “Internal Shift Tray SH3070”, “Side Tray Type M3”, “Bridge
Unit BU3070”, “Finisher SR3140”, “Booklet Finisher SR3150”, “Finisher SR3160”,
“Booklet Finisher SR3170”.
§ To use together with the “1 Bin Tray BN3110”, after attaching the bottom plate of this
option, attach the “1 Bin Tray BN3110”, and then install this option.
§ To use together with the “Punch Unit PU3040”, first attach the “Punch Unit PU3040”
before installing this option.
1. Remove the orange tape and shipping retainers.
2. Remove the package items (fixing screws, etc.).
3. Open the front cover.
4. Paper output tray [A].
5. Upper left cover [A] (
×1).
To Next Page
Loading...
Need help?
General
