Enabling and Disabling Service Program Mode
System Maintenance Section 1-1 D146/D147/D148/D149/D150
Mode
1. SERVICE PROGRAM MODE
1.1 ENABLING AND DISABLING SERVICE PROGRAM
MODE
§ Make sure that the data-in LED (
) is not on before you go into the SP mode. This LED
indicates that some data is coming to the machine. When the LED is on, wait for the
copier to process the data.
§ The Service Program Mode is for use by service representatives only. If this mode is
used by anyone other than service representatives for any reason, data might be deleted
or settings might be changed. In such case, product quality cannot be guaranteed any
more.
1.1.1 ENTERING SP MODE
For details, ask your supervisor.
1.1.2 EXITING SP MODE
Press "Exit" on the LCD twice to return to the copy window.
To Next Page
Loading...
Need help?
General
