Types of SP Modes
D146/D147/D148/D149/D150 1-6 System Maintenance Section
1.2.6 REMARKS
The maximum number of characters which can show on the control panel screen is limited to 30
characters. For this reason, some of the SP modes shown on the screen need to be abbreviated.
The following are abbreviations used for the SP modes for which the full description is over 20
characters.
Item Description
Paper Weight
Thin paper: 52-59 g/m
2
, 13.9-15.7lb.
Plain Paper: 60-81 g/m
2
, 16-21.6lb.
Middle Thick: 82-105 g/m
2
, 21.9-28lb.
Thick Paper 1: 106-169 g/m
2
, 28.5-44.9lb.
Thick Paper 2: 170-220 g/m
2
, 45-58lb.
Thick Paper 3: 221-256 g/m
2
, 59-68lb
Thick 4: 257 g/m
2
-300 g/m
2
, 68.4-79.8lb
Paper Type
N: Normal paper
MTH: Middle thick paper
TH: Thick paper
Paper Feed Station
P: Paper tray
B: By-pass table
Color Mode [Color]
[K]: Black in B&W mode
[Y], [M], or [C]: Yellow, Magenta, or Cyan in Full Color mode
[YMC]: Only for Yellow, Magenta, and Cyan
[FC]: Full Color mode
[FC, K], [FC, Y], [FC, M], or [FC, C]: Black, Yellow, Magenta, or
Cyan in full color mode
Print Mode
S: Simplex
D: Duplex
Process Speed
L: Low speed (73 mm/s)
M: Middle speed (108 mm/s)
H: High speed (D146/D147: 146, D148: 186, D149/D150: 256
mm/s)
To Next Page
Loading...
Need help?
General
