13.13 Filtering the tool management lists
The filter function allows you to filter-out tools with specific properties in the tool management
lists.
For instance, you have the option of displaying tools during machining that have already
reached the prewarning limit in order to prepare the corresponding tools to be loaded.
Filter criteria
● Only display the first cutting edge
● Only tools that are ready to use
● Only tools with active code
● Only locked tools
● Only tools that have reached the prewarning limit
● Only tools with remaining quantity of ... to ...
● Only tools with residual tool life of ... to ...
● Only tools with unloading marking
● Only tools with loading marking
Machine manufacturer
Please observe the information provided by the machine manufacturer.
Note
Multiple selection
You have the option of selecting several criteria. You will receive an appropriate message if
conflicting filter options are selected.
You can configure OR logic operations for the various filter criteria.
References
A description of the configuration options is provided in
SINUMERIK Operate Commissioning Manual
Tool management
13.13 Filtering the tool management lists
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0 731
To Next Page
Loading...
Need help?
General
