Shortcuts Action
To the last field of the last network
- OR -
Open the next program block in the same window
Open the previous program block in the same window
The function of the Select key depends on the position of the input focus.
● Table row: Displays the complete text row
● Network title: Displays the network comment
● Command: Displays all operands
If the input focus is positioned on a command, all operands including the
comments are displayed.
23.5.4 Displaying the program status
You can display the program status.
The following Information is displayed:
● Program status: "Run" or "Stop"
● Status of the application area: "Sym" or "Abs"
Displaying the program status
If your PLC has the "Progress status" function, the status values as well as the information
flow are displayed at the time of execution of the operations. The status of the local data
memory and the accumulators is also displayed.
The "Progress status" display is also controlled using the "Program stat." softkey
Colors for displaying the program status
In the progress status, different colors are used to display information.
Display Color
Signal flow of the busbar when the status is active Blue
Signal flow in the networks Blue
All operations that are active and that are executed without error (corresponds
to the signal flow)
Blue
Status of the Boolean operations (corresponds to the signal flow) Blue
Timers and counters active Green
Error during execution Red
Edit PLC user program (828D only)
23.5 View of the program blocks
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0 909
To Next Page
Loading...
Need help?
General
