Parameter Description Unit
F Feedrate mm/min
mm/rev
Straight all axes
X
Z
Y
B
Target position in the X direction (abs or inc)
Target position in the Z direction (abs or inc)
Target position in the Y direction (abs or inc)
Target position of the B axis (abs or inc)
mm
mm
mm
mm
Straight X α
X
α
Target position in the X direction (abs or inc)
Angle of the straight line to the X axis
mm
Degrees
Straight Z α
Z
α
Target position in the Z direction (abs or inc)
Angle of the straight line to the Z axis
mm
Degrees
16.6.3.2 Circular milling
You can use this function for a simple circular machining.
Procedure
1. "Manual Machine" is active.
2. Press the "Straight circle" softkey.
3. Press the "Circle" softkey.
4. Specify the desired value for the feedrate F.
5. Select the desired circle input (e.g. "End point + radius") and the direction
of rotation.
6. Enter the target position as well as the circle center point or radius.
Using the "Graphic view" softkey, you can toggle between the help screen
and the graphic view in the screen.
Parameter
Parameter Description Unit
F Feedrate mm/min
mm/rev
Circle input
● End point + center point
● End point + radius
mm
Working with Manual Machine
16.6 Simple workpiece machining
Milling
840 Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
To Next Page
Loading...
Need help?
General
