Tektronix AFG31000 Series User Manual

Function introduction
120 AFG31000 Series Arbitrary Function Generator User's Manual
Change instrument settings
The default settings are restored when you turn on the instrument. You can set the instrument to
remember and restore the last used settings next time you turn on the instrument (see Utility menu
(on page 117) for more information).
To change the Power On settings:
1. Press the front-panel Utility button (located in the SETUP area).
Figure 113: Utility button
2. On the touchscreen, select System.
3. From the Power On option, select Last.
You can make additional changes in the System menu. For example, you can change:
 Trigger Out to Sync or Trigger
 Enable or disable the Click Tone
 Change the Clock Ref to External or Internal
 Enable or disable the screen saver by choosing On or Off
 Enable the beeper by choosing On or Off
 Adjust the brightness of the touchscreen with the slider bar

Tektronix AFG31000 Series Specifications

General

Brand	Tektronix
Model	AFG31000 Series
Category	Inverter
Language	English