Application examples
162 AFG31000 Series Arbitrary Function Generator User's Manual
Measurement of filter characteristics
Use the instrument sweep function to observe the frequency characteristics of the 50 Ω filter.
To observe frequency characteristics:
1. Connect the CH1 output of the instrument to an oscilloscope CH1 input with a BNC cable.
2. Connect the Trigger Output of the instrument to an external trigger input connector of an
oscilloscope.
3. Set the oscilloscope input impedance to 50 Ω.
Figure 166: AFG31000 Series connected to an oscilloscope
To Next Page
Loading...
Need help?
General
