Tektronix AFG31000 Series User Manual

Function introduction
AFG31000 Series Arbitrary Function Generator User's Manual 71
Invert waveform polarity
To invert a waveform polarity, use the swipe area on the bottom of the touchscreen. The following
example shows how to get a differential signal using the invert function of the two-channel model.
To invert waveform polarity:
1. Select Basic.
2. Select Sine wave.
3. Select Continuous mode on the CH1 drop-down menu on the touchscreen.
4. On the touchscreen, swipe the arrow at the bottom up.
5. On the InterChannel tab, select the Copy CH1 to CH2 button. When you see a message asking
if you want to copy the settings, select OK.
Figure 45: Copy channel 1 to channel 2

Tektronix AFG31000 Series Specifications

General

Brand	Tektronix
Model	AFG31000 Series
Category	Inverter
Language	English