Tektronix AFG31000 Series User Manual

Function introduction
AFG31000 Series Arbitrary Function Generator User's Manual 59
Sweep a waveform
The sweep outputs a waveform with the output signal frequency varying linearly or logarithmically.
You can set the following settings for Sweep (scroll down to reveal all of the options):
 Start frequency
 Stop frequency
 Amplitude
 Offset
 Units
 Sweep time
 Return time
 Center frequency
 Frequency span
 Hold time
Figure 33: Sweep waveform settings

Tektronix AFG31000 Series Specifications

General

Brand	Tektronix
Model	AFG31000 Series
Category	Inverter
Language	English