© 2009 Verizon. All Rights Reserved.
161
Verizon Hub User Guide
Danger—Electric Shock and Fire.
Electric current from power, telephone, and communication
cables is hazardous, and could result in electric shock
and/or re.
To avoid electric shock, use caution when connecting cables.
For example, do not connect safety extra-low voltage (SELV)
circuits to telephone-network voltage (TNV) circuits. LAN
ports contain SELV circuits, and WAN ports contain TNV
circuits. Some LAN and WAN ports both use RJ-45 connectors.
To avoid electric shock, do not operate the product or connect
or disconnect cables during electrical storms. To avoid electric
shock, do not use this product in or near water.
To reduce the risk of re or overheating, keep this product
in well-ventilated areas, away from radiators or other heat
sources. Do not block cooling vents.
The plug-socket combination must be accessible at all times
because it serves as the main power-disconnecting device.
Use only the manufacturer-provided AC adaptor approved for
use with this product. Use of another AC adaptor may cause a
re or explosion.
This product relies on short-circuit (overcurrent) protection
installed in your home or oce. Ensure that a fuse or circuit
breaker no larger than 120 VAC, 15A U.S. is used on the phase
conductors (all current-carrying conductors).
Unplug this product from the wall outlet and refer servicing
to qualied service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally when
the operating instructions are followed. Adjust
only those controls that are covered by the op-
erating instructions, since improper adjustment
of other controls may result in damage and will
often require extensive work by a qualied techni-
cian to restore the product to normal condition.
To Next Page
Loading...
Need help?
General
