© 2009 Verizon. All Rights Reserved.
4
Verizon Hub User Guide
Set Up Verizon Hub and Digital Voice Service.
Once your Verizon Hub is powered on, an on-screen setup will
walk you through a few steps to connect to your Digital Voice
service. Simply follow the steps.
After you plug in your Verizon Hub, the LCD screen will 1.
display a Welcome screen.
Touch 2. Next.
If you have an established home network, you can 3.
connect your Verizon Hub to the wired or wireless network.
If you have a wired home network, touch • Use a
Network Cable.
If you have a wireless home network, touch • Use
My Wireless Network.
How to Enter Information.
To navigate the touch screen, touch the screen with your
nger or stylus to move through the steps.
To enter information into blank elds, touch the empty eld,
which will launch a keyboard.
The keyboard is enabled with predictive text so it will assist
you in the words you enter. If Verizon Hub predicts the correct
word, touch the highlighted text to add the word to your message.
Connect to Wireless Network.
Be sure to have your Network Name (SSID) and
Encryption Key or Pass Phrase.
After Verizon Hub has scanned for available networks, 1.
choose your network from the list of available
wireless networks.
If your network isn’t listed, touch 2. Add Network to
manually enter your networking settings.
a. Touch Enter Network Name.
b. Use the keyboard to enter your network’s
Network Name (SSID) and touch Enter.
To Next Page
Loading...
Need help?
General
