© 2009 Verizon. All Rights Reserved.
5
Verizon Hub User Guide
TIP:
The Network Name (SSID) is the name of your wireless
network. It may be found on your router or in the router’s
manual. If you’re unable to locate this information, please
contact your router manufacturer for assistance.
c. Touch Enter Encryption Key.
d. Use the keyboard to enter your network’s
Encryption Key or Pass Phrase.
e. Touch Enter.
TIP:
An Encryption Key or Pass Phrase is used to prevent
strangers from accessing your wireless network. It may be
found on the router or in the router’s manual. This may also
be identied as a WEP, WEP Key or Network Password. If you’re
unable to locate this information, please contact your router
manufacturer for assistance.
We recommend using a secure network for the Verizon 3.
Hub, which will be indicated by a lock image next to the
network name.
Select the security type – 4. None, WEP, WPA-PSK/WPA2.
Note: Use the default setting unless you know for sure your
security type is dierent.
To set 5. Advanced settings, touch Advanced and
select the Encryption Key Type and Index.
When you’re done, touch 6. Save.
Verizon Hub will attempt to connect to your 7.
wireless network.
Touch 8. Next when the message displays saying you
have successfully connected to your network.
Connect to Wired Network.
Locate the Ethernet cable provided in your box.1.
Connect one end of the Ethernet cable into the 2.
Ethernet port on the back panel of the Verizon Hub.
Connect the other end of the Ethernet cable into 3.
your network router or Ethernet wall jack.
To Next Page
Loading...
Need help?
General
