42-46
Rear drive shafts, servicing
Removing and installing drive shafts Page 42-
37
Note:
Grease quantity:
-
- outer constant velocity joint 80 g G-6.3
-
- inner constant velocity joint 80 9 G-6.3
Greasing outer joint: press half of the grease
into the joint, and the other half evenly into the
boot.
Greasing inner joint: press half of the grease
into the inner joint from both sides, the other
half evenly into the boot.
When replacing the boot, regrease joint if
required.
Rear drive shafts, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.42.4