Volkswagen Passat 1996 User Manual

48-81
Boot, installing
Note:
- Check boot for wear (cuts, cracks) and ensure
sealing surfaces are clean.
- Install boot, but first turn the tie rod so that the tie
rod ball joint shank is in the installation position.
- Install pressure balance line.
Do not damage sticker -A- when pushing the boot
on (only on TRW power steering gears).
Make sure that the boot and the pressure balance
line are installed correctly.
During assembly of the boot ensure that the bead -
arrows- contacts the housing.
Only use genuine hose clips -B-
1 - Boot
2 - Housing
Page
81
of
99
Steering
12/7/2004
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.48.1

Volkswagen Passat 1996 Specifications

General

Brand	Volkswagen
Model	Passat 1996
Category	Automobile
Language	English