Volkswagen Passat 1996 User Manual

47-19
Rear brake caliper piston, removing and
installing
Removing
Note:
- Thread piston out of brake caliper housing by
turning the knurled wheel counter-clockwise.
If piston is difficult to move, use a 13 mm open
end wrench on the flats (arrow A) provided for this
purpose.
Install special tool 3272 so that the collar (arrow)
is before the piston.
Note:
Make sure that the surface of the cylinder is not
damaged during removal.
- Remove seal with a screwdriver
Page
5
of
8
Rear brake caliper, servicing
12/7/2004
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.47.4

Volkswagen Passat 1996 Specifications

General

Brand	Volkswagen
Model	Passat 1996
Category	Automobile
Language	English