Yealink SIP-T2 Series User Manual

Configuring Basic Features
245
Phone/Web User Interface
French
German
Italian
Polish
Portuguese
Spanish
Turkish
Russian
Note
Languages available for selection depend on language packs currently loaded to the IP phone.
You can customize the translation of the existing language on the phone user interface or web
user interface. You can also make new languages (not included in the available language list)
available for use on the phone user interface and web user interface by loading language packs
to the IP phone. Language packs can only be loaded using configuration files.
You can ask the distributor or Yealink FAE for language packs. You can also obtain the language
packs online: http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage.
For more information on obtaining the language packs, refer to Obtaining Boot
Files/Configuration Files/Resource Files on page 131.
Note
Customizing a Language for Phone User Interface
The following table lists the available languages and associated language packs for the phone
user interface:
Available Language
Associated Language Pack
English
000.GUI.English.lang
Chinese Simplified
001.GUI.Chinese_S.lang
Chinese Traditional
002.GUI.Chinese_T.lang
French
003.GUI.French.lang
To modify translation of an existing language, do not rename the language file.
The new added language must be supported by the font library on the IP phone. If the characters
in the custom language file are not supported by the phone, the IP phone will display “?” instead.
For SIP-T42G/T41P/T40P/T40G/T23P/T23G/T21(P) E2/T19(P) E2 IP phones, they do not support
Chinese by default. For more information, contact Yealink FAE.

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English