Yealink SIP-T2 Series User Manual

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
802
4. Enter the desired value in the Handfree Send Volume (-50~50) field.
5. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
6. Click OK to reboot the phone.
Audio Codecs
CODEC is an abbreviation of COmpress-DECompress, capable of coding or decoding a digital
data stream or signal by implementing an algorithm. The object of the algorithm is to represent
the high-fidelity audio signal with minimum number of bits while retaining the quality. This can
effectively reduce the frame size and the bandwidth required for audio transmission.
The audio codec that the phone uses to establish a call should be supported by the SIP server.
When placing a call, the IP phone will offer the enabled audio codec list to the server and then
use the audio codec negotiated with the called party according to the priority.
The following table lists the audio codecs supported by each phone model:
Phone Model
Supported Audio Codecs
Default Audio Codecs
SIP-T48G/T48S/T46G/T46S
/T42G/T42S/T41P/T41S/T2
9G
G722, PCMA, PCMU, G729,
G726-16, G726-24, G726-32,
G726-40, iLBC, G723_53, G723_63
G722, PCMA, PCMU,
G729
SIP-T27P/T27G
G722, PCMA, PCMU, G729,
G726-16, G726-24, G726-32,
G726-40, iLBC
G722, PCMA, PCMU,
G729
SIP-T40P/T40G/T23P/T23G
/T21(P) E2/T19(P) E2
G722, PCMA, PCMU, G729,
G726-16, G726-24, G726-32,
G726-40, iLBC, opus
G722, PCMA, PCMU,
G729

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English