Configuring Basic Features
367
Allow IP Call
Allow IP Call feature allows IP phones to receive or place an IP address call. You can neither
receive nor place an IP address call if allow IP call feature is disabled.
Procedure
Allow IP call can be configured using the following methods.
Central Provisioning
(Configuration File)
Configure allow IP call.
Parameter:
features.direct_ip_call_enable
Configure allow IP call.
Navigate to:
http://<phoneIPAddress>/servlet?p=featu
res-general&q=load
Details of Configuration Parameter:
features.direct_ip_call_enable
Description:
Enables or disables allow IP address call.
0-Disabled
1-Enabled
Note: If you want to receive an IP address call, make sure the value of the parameter
“sip.trust_ctrl” is set to 0 (Disabled).
Web User Interface:
Features->General Information->Allow IP Call
Phone User Interface:
None
To configure allow IP call feature via web user interface:
1. Click on Features->General Information.
To Next Page
Loading...
Need help?
General
