Yealink SIP-T2 Series User Manual

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
750
Parameters
Permitted Values
Default
edk.id_mode.enable
0 or 1
0
Description:
Enables or disables to view the softkey id or menu item id by long pressing the Volume Up
key.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), you can view the softkey id or menu item id by long pressing the
Volume Up key for three seconds at any interface.
Note: The menu item id displays on the status bar of the phone. Long pressing the Volume
Up key for three seconds to exit. It works only if the value of the parameter
“features.enhanced_dss_keys.enable” is set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
Using the Enhanced DSS Keys (EDK) List parameters to define a macro is useful when defining
more than one soft key or DSS key.
Procedure
EDK list can be configured using the configuration files.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure EDK list.
Parameters:
edk.edklist.X.enable
edk.edklist.X.mname
edk.edklist.X.action
Details of Configuration Parameters:
Parameters
Permitted Values
Default
edk.edklist.X.enable
(X ranges from 1 to 255)
0 or 1
0
Description:

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English