Yealink SIP-T2 Series User Manual

Configuring Audio Features
777
If Common is selected, this account will use the ring tone selected for the phone.
4. Click Confirm to accept the change.
To select a ring tone for the phone via phone user interface:
1. Press Menu->Basic->Sound->Ring Tones->Common.
2. Press or to select the desired ring tone.
3. Press the Save soft key to accept the change.
To select a ring tone for the account via phone user interface:
1. Press Menu->Basic->Sound->Ring Tones.
2. Press or to select the desired account and then press the Enter soft key.
3. Press or to select the desired ring tone.
If Common is selected, this account will use the ring tone selected for the phone.
4. Press the Save soft key to accept the change.
Distinctive Ring Tones
Distinctive ring tones allows certain incoming calls to trigger IP phones to play distinctive ring
tones. The IP phone inspects the INVITE request for an "Alert-Info" header when receiving an
incoming call. If the INVITE request contains an "Alert-Info" header, the IP phone strips out the
URL or keyword parameter and maps it to the appropriate ring tone.
Note
Alert-Info headers in the following four formats:
1) Alert-Info: Bellcore-drN
2) Alert-Info: ringtone-N (or Alert-Info: MyMelodyN)
If the caller already exists in the local directory, the ring tone assigned to the caller should be
preferentially played.

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English