Configuring Basic Features
445
4. Enter the conference URI in the Conference URI field.
5. Click Confirm to accept the change.
Transfer on Conference Hang Up
For a local three-way conference, all parties drop the call when the conference initiator drops
the conference call. Transfer on conference hang up feature allows the other two parties to
remain connected when the conference initiator drops the conference call. Network conference
does not have a conference initiator, so if any party exits the network conference, the remaining
parties are still connected. For more information on network conference, refer to Network
Conference on page 443.
Procedure
Transfer on conference hang up can be configured using the following methods.
Central Provisioning
(Configuration File)
Configure the transfer on conference
hang up.
Parameter:
transfer.tran_others_after_conf_enable
Configure the transfer on conference
hang up.
Navigate to:
http://<phoneIPAddress>/servlet?p=f
eatures-transfer&q=load
To Next Page
Loading...
Need help?
General
