Yealink SIP-T2 Series User Manual

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
402
To configure 180 ring workaround via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of 180 Ring Workaround.
3. Click Confirm to accept the change.
Use Outbound Proxy in Dialog
An outbound proxy server can receive all initiating request messages and route them to the
designated destination. If the IP phone is configured to use an outbound proxy server within a
dialog, all SIP request messages from the IP phone will be sent to the outbound proxy server
forcibly.
Note
Procedure
Use outbound proxy in dialog can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Specify whether to use outbound
proxy in a dialog.
Parameter:
sip.use_out_bound_in_dialog
Web User Interface
Specify whether to use outbound
proxy in a dialog.
Navigate to:
To use this feature, make sure the outbound server has been correctly configured on the IP
phone. For more information on how to configure outbound server, refer to Account Registration
on page 203.

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English