Configuring Basic Features
365
2. Select the desired value from the pull-down list of Enable Auto Answer Tone.
3. Click Confirm to accept the change.
To configure auto answer via phone user interface:
1. Press Menu->Features->Auto Answer.
2. Select the desired line.
3. Press or , or the Switch soft key to select the desired value from the Auto
Answer field.
4. Press the Save soft key to accept the change.
IP Direct Auto Answer
IP direct auto answer allows IP phones to automatically answer an IP address call. IP direct auto
answer works only if allow IP call is enabled. For more information on allow IP call, refer to Allow
IP Call on page 367.
Procedure
IP direct auto answer can only be configured using the following methods.
Central Provisioning
(Configuration File)
Configure IP direct auto answer
feature.
Parameter:
features.ip_call.auto_answer.enable
Configure IP direct auto answer
feature.
Navigate to:
To Next Page
Loading...
Need help?
General
