Yealink SIP-T2 Series User Manual

Configuring Basic Features
287
Details of Configuration Parameter:
Parameter
Permitted Values
Default
dialplan_dialnow.url
URL within 511 characters
Blank
Description:
Configures the access URL of the dial now rule template file.
Example:
dialplan_dialnow.url = http://192.168.10.25/dialnow.xml
During the auto provisioning process, the IP phone connects to the provisioning server
“192.168.10.25”, and downloads the dial now rule file “dialnow.xml”.
Note: It works only if the values of the parameters “dialplan.digitmap.enable” and
“account.X.dialplan.digitmap.enable” are set to 0 (Disabled).
Web User Interface:
None
Phone User Interface:
None
Area Code
Area codes are also known as Numbering Plan Areas (NPAs). They usually indicate geographical
areas in one country. When entered numbers match the predefined area code rule, the IP phone
will automatically add the area code before the numbers when dialing out them. IP phones only
support one area code rule.
Procedure
Area code rule can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Create the area code rule and
specify the maximum and minimum
lengths of entered numbers.
Parameters:
dialplan.area_code.code
dialplan.area_code.min_len
dialplan.area_code.max_len
dialplan.area_code.line_id
Web User Interface
Create the area code rule and
specify the maximum and minimum
lengths of entered numbers.
Navigate to:

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English