Yealink SIP-T2 Series User Manual

Configuring Basic Features
359
Parameters
Permitted Values
Default
Description:
Configures the interval (in seconds) for the IP phone to wait between redials.
The IP phone redials the dialed number at regular intervals till the callee answers the call.
Note: It works only if the value of the parameter “auto_redial.enable” is set to 1 (Enabled).
Web User Interface:
Features->General Information->Auto Redial Interval (1~300s)
Phone User Interface:
Menu->Features->Others->Auto Redial->Redial Interval
auto_redial.times
Integer from 1 to 300
10
Description:
Configures the auto redial times when the callee is temporarily unavailable.
The IP phone tries to redial the dialed number as many times as configured till the callee
answers the call.
Note: It works only if the value of the parameter “auto_redial.enable” is set to 1 (Enabled).
Web User Interface:
Features->General Information->Auto Redial Times (1~300)
Phone User Interface:
Menu->Features->Others->Auto Redial->Redial Times
To configure auto redial via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of Auto Redial.
3. Enter the waiting time in the Auto Redial Interval (1~300s) field.
4. Enter the desired times in the Auto Redial Times (1~300) field.
5. Click Confirm to accept the change.

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English