Yealink SIP-T2 Series User Manual

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
vi
on IP phones.
 Chapter 8, “Troubleshooting” describes how to troubleshoot IP phones and provides some
common troubleshooting solutions.
 Chapter 9, “Appendix” provides the glossary, time zones, trusted certificates, auto
provisioning flowchart, reference information about IP phones compliant with RFC 3261,
SIP call flows and some other function lists (e.g., DSS keys, reading icons).
Related Documentations
This guide covers SIP-T48G/S, SIP-T46G/S, SIP-T42G/S, SIP-T41P/S, SIP-T40P/G, SIP-T29G,
SIP-T27P/G, SIP-T23P/G, SIP-T21(P) E2 and SIP-T19(P) E2 IP phones. The following related
documents are available:
 Quick Start Guides, which describe how to assemble IP phones and configure the most
basic features available on IP phones.
 User Guides, which describe how to configure and use the basic and advanced features
available on IP phones via phone user interface.
 Auto Provisioning Guide, which describes how to provision IP phones using the boot file
and configuration files.
The purpose of Auto Provisioning Guide is to serve as a basic guidance for provisioning
Yealink IP phones with a provisioning server. If you are new to this process, it is helpful to
read this guide.
 Description of Configuration Parameters in CFG Files, which describes all configuration
parameters in configuration files.
Note that Yealink administrator guide contains most of parameters. If you want to find out
more parameters which are not listed in this guide, please refer to Description of
Configuration Parameters in CFG Files guide.
 y000000000000.boot template boot file.
 <y0000000000xx>.cfg and <MAC>.cfg template configuration files.
 IP Phones Deployment Guide for BroadSoft UC-One Environments, which describes how to
configure BroadSoft features on the BroadWorks web portal and IP phones.
 IP Phone Features Integrated with BroadSoft UC-One User Guide, which describes how to
configure and use IP phone features integrated with BroadSoft UC-One on Yealink IP
phones.
When the SIP server type is set to BroadSoft, please refer to these two guides to have a
better knowledge of configuring and using features integrated with Broadsoft UC-One.
For support or service, please contact your Yealink reseller or go to Yealink Technical Support
online: http://support.yealink.com/.

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English