Configuring Advanced Features
673
Phone User Interface:
None
hotdesking.startup_outbound_enable
Description:
Enables or disables the IP phone to provide input field of outbound server on the logon
wizard during the first startup.
0-Disabled
1-Enabled
Note: It works only if there is no registered account on the IP phone and the value of the
parameter “phone_setting.logon_wizard” is set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
To configure logon wizard feature via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of Logon Wizard.
3. Click Confirm to accept the change.
To Next Page
Loading...
Need help?
General
