Yealink SIP-T2 Series User Manual

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series IP Phones
828
Parameters
Permitted Values
Default
Configures the minimum delay time (in milliseconds) of jitter buffer in the wireless network.
Note: It works only if the value of the parameter “voice.jib.wifi.adaptive” is set to 1
(Adaptive). The value of the minimum delay time should be less than or equal to that of the
normal delay time (configured by the parameter “voice.jib.wifi.normal”). It is only applicable
to SIP-T48G/T48S/T46G/T46S/T29G IP phones.
Web User Interface:
None
Phone User Interface:
None
voice.jib.wifi.max
Integer from 0 to 500
500
Description:
Configures the maximum delay time (in milliseconds) of jitter buffer in the wireless
network.
Note: It works only if the value of the parameter “voice.jib.wifi.adaptive” is set to 1
(Adaptive). It is only applicable to SIP-T48G/T48S/T46G/T46S/T29G IP phones.
Web User Interface:
None
Phone User Interface:
None
voice.jib.wifi.normal
Integer from 0 to 500
240
Description:
Configures the normal delay time (in milliseconds) of jitter buffer in the wireless network.
Note: It works only if the value of the parameter “voice.jib.wifi.adaptive” is set to 0 (Fixed).
The value of the normal delay time should be less than or equal to that of the maximum
delay time (configured by the parameter “voice.jib.wifi.max”). It is only applicable to
SIP-T48G/T48S/T46G/T46S/T29G IP phones.
Web User Interface:
None
Phone User Interface:
None
To configure Jitter Buffer in the wired network via web user interface:
1. Click on Settings->Voice.
2. Mark the desired radio box in the Type field.

Yealink SIP-T2 Series Specifications

General

Brand	Yealink
Model	SIP-T2 Series
Category	IP Phone
Language	English