Phone Customization
133
1. Double click the PictureExDemo.exe.
2. Click Add button to open a *.bmp file.
You can repeat the step 2 to add multiple original picture files.
3. Click the Convert button.
Then you can find the DOB logo files in the adv directory.
Custom Logo Configuration
The following table lists the parameters you can use to configure custom logo.
Parameter phone_setting.lcd_logo.mode <y0000000000xx>.cfg
Description
It configures the logo shown on the LCD screen.
Note: It is not applicable to T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones.
Permitted
Values
0-Off, the IP phone is not allowed to display a logo.
1-System Logo, the LCD screen will display the system logo.
2-Custom Logo, the LCD screen will display the custom logo (you need to upload a custom logo file to
the IP phone).
Default 0
Web UI Features->General Information->Use Logo
To Next Page
Loading...
Need help?
General
