Yealink T21PE2 User Manual

Phone Customization
135
Call Display Configuration
The following table lists the parameters you can use to configure call display.
Parameter phone_setting.contact_photo_display.enable <y0000000000xx>.cfg
Description
It configures whether to display contact avatar when it receives an incoming call, dials an outgoing call or
engages in a call.
Note: It is only applicable to T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones.
Permitted
Values
0-Never, do not display contact avatar no matter whether the contact avatar exists or not
1-Always, display the customized contact avatar if it exists; display the built-in avatar if the customized
contact avatar does not exist
2-Adaptive, display the customized contact avatar if it exists; otherwise do not display
Default 1
Web UI Settings->Call Display->Contact Photo Display Mode
Parameter
account.X.picture_info_enable
[1]
<MAC>.cfg
Description
It enables or disables the IP phone to download the picture from the URL contained in the Call-Info or
Caller-Image Header of Invite message.
Note: It is only applicable to T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter phone_setting.called_party_info_display.enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to display the local identity when it receives an incoming call or during
a call.
Note: The information display method is configured by the parameter “phone_setting.call_info_display_
method”. To display the local identity during a call is not applicable to
T48G/T46G/T42G/T41P/T29G/T23P/T23G/T21(P) E2/T19(P) E2 IP phones.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Settings->Call Display->Display Called Party Information
Parameter phone_setting.call_info_display_method <y0000000000xx>.cfg
Description
It configures the call information display method when the IP phone receives an incoming call, dials an
outgoing call or is during an active call.
Permitted
Values
0-Name+Number
1-Number+Name
2-Name
3-Number
4-Full Contact Info (display name<sip:xxx@domain.com>)

Yealink T21PE2 Specifications

General

Brand	Yealink
Model	T21PE2
Category	IP Phone
Language	English