Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
518
The <MAC>-sys.log file reports the logs with a configured severity level and the higher. For example, if you have con-
figured the severity level of the log to be reported to the <MAC>-sys.log file to 4, then the log with a severity level of 0
to 4 will all be reported.
Syslog Logging
You can also configure the IP phone to send syslog messages to a syslog server in real time.
You can specify syslog details such as IP address or host name, server type, facility, and the severity level of events you
want to log. You can also choose to prepend the phone's MAC address to log messages.
Topics
Syslog Logging Configuration
Viewing the Syslog Messages on Your Syslog Server
Syslog Logging Configuration
The following table lists the parameters you can use to configure syslog logging.
Parameter static.syslog.enable <y0000000000xx>.cfg
Description It enables or disables the IP phone to upload log messages to the syslog server in real time.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Settings->Configuration->Syslog->Enable Syslog
Parameter static.syslog.server <y0000000000xx>.cfg
Description
It configures the IP address or domain name of the syslog server when exporting log to the syslog server.
Example:
static.syslog.server = 192.168.1.100
Permitted
Values
IP address or domain name
Default Blank
Web UI Settings->Configuration->Syslog->Syslog Server
Parameter static.syslog.server_port <y0000000000xx>.cfg
Description
It configures the port of the syslog server.
Example:
To Next Page
Loading...
Need help?
General
