Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
146
Values
Default Blank
Parameter custom_softkey_ring_back.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom file for the soft key presented on the phone screen in the
RingBack state.
Example:
custom_softkey_ring_back.url = http://192.168.1.20/XMLfiles/RingBack.xml
During auto provisioning, the IP phone connects to the provisioning server “192.168.1.20”, and down-
loads the RingBack.xml file from the “XMLfiles” directory.
Note: It works only if “phone_setting.custom_softkey_enable” is set to 1 (Enabled).
Permitted
Values
URL within 511 characters
Default Blank
Parameter custom_softkey_talking.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom file for the soft key presented on the phone screen in the Talk-
ing state.
Example:
custom_softkey_talking.url = http://192.168.1.20/XMLfiles/Talking.xml
During auto provisioning, the IP phone connects to the provisioning server “192.168.1.20”, and down-
loads the Talking.xml file from the “XMLfiles” directory.
Note: It works only if “phone_setting.custom_softkey_enable” is set to 1 (Enabled).
Permitted
Values
URL within 511 characters
Default Blank
Example: Setting the Soft Keys Layout in Talking State
The following example shows the configuration for setting the soft key layout in the talking state.
Customize a softkey layout file “Talking.xml” and place this file to the provisioning server “http://192.168.10.25”.
Example
phone_setting.custom_softkey_enable = 1
custom_softkey_talking.url = http://192.168.10.25/Talking.xml
After provisioning, you can use the enabled soft keys during a call.
Input Method
Yealink IP phones support 6 input methods: 2aB, abc, Abc, 123, ABC and Hebrew. You can specify the default input
method for entering different types of data. You can also customize the existing input method.
Topics
Input Method File Customization
To Next Page
Loading...
Need help?
General
