Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
504
Parameter voice_mail.message_key.mode <y0000000000xx>.cfg
Description It configures the phone behavior when pressing the MESSAGE key when the IP phone is idle.
Permitted
Values
0-enter the Set Voice Mail Code screen if the voice mail access code has not been configured; dial out the
voice mail access code if the voice mail access code has been configured.
1-enter the View Voice Mail screen
Default 0
Broadsoft SCA
Parameter
account.X.share_line.barge_in.enable
[1]
<MAC>.cfg
Description
It enables or disables the users to interrupt/barge into an active call on the shared line.
Note: It is not applicable to T19(P) E2/CP920 IP phones.
Permitted
Values
0-Disabled
1-Enabled
Default 1
Parameter
account.X.shared_line_one_touch_bargein.enable
[1]
<MAC>.cfg
Description
It enables or disables the IP phone to barge in the call between remote shared line party and the third
party by pressing the line key.
Note: It is not applicable to T19(P) E2/CP920 IP phones
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter
account.X.shared_line_one_touch_retrieve.enable
[1]
<MAC>.cfg
Description
It enables or disables the IP phone to retrieve the public held call on remote shared line party phone by
pressing the line key.
Note: It is not applicable to T19(P) E2/CP920 IP phones.
Permitted
Values
0-Disabled
1-Enabled
Default 1
Parameter features.auto_release_bla_line <y0000000000xx>.cfg
Description
It enables or disables the server to release the connection by sending a notify message to IP phone when
the call is ended.
Permitted
Values
0-Disabled, the IP phone will send a notify message to the server to release the connection.
1-Enabled
Default 0
Parameter
account.X.sca_manage_interface_display_time
[1]
<MAC>.cfg
Description
It configures how long (in seconds) will the IP phone exit the Shared Calls screen.
Example:
account.1.sca_manage_interface_display_time=10
To Next Page
Loading...
Need help?
General
