Audio Features
357
Headset Prior
Headset prior allows users to use headset preferentially if a headset is physically connected to the IP phone. This fea-
ture is especially useful for permanent or full-time headset users.
It is not applicable to CP920 IP phones.
Note
It is not applicable to the Bluetooth headset and USB headset.
Topic
Headset Prior Configuration
Headset Prior Configuration
The following table lists the parameters you can use to configure headset prior.
Parameter features.headset_prior <y0000000000xx>.cfg
Description
It enables or disables to preferentially use the headset mode for all incoming and outgoing calls.
Note: It works only if “features.headset_mode.enable” is set to 1 (Enabled). It is not applicable to CP920 IP
phones.
Permitted
Values
0-Disabled, the headset mode will be deactivated after the call, if you switch the headset mode to speak-
erphone/handset mode.
1-Enabled, the headset mode will not be deactivated after the call, even if you switch the headset mode
to speakerphone/handset mode.
Default 0
Web UI Features->General Information->Headset Prior
Parameter features.headset.ctrl_call.enable <y0000000000xx>.cfg
Description
It enables or disables the user to initiate or end a call by pressing the HEADSET key.
Note: It works only if “features.headset_mode.enable” is set to 1 (Enabled). It is not applicable to CP920 IP
phones.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Dual Headset
Dual headset allows you to use two headsets on one IP phone. To use this feature, you need to physically connect two
headsets to the headset and handset jacks respectively. Once the IP phone connects to a call, the user with the headset
connected to the headset jack has full-duplex capability, while the user with the headset connected to the handset
jack is only able to listen.
Note
Dual headset is not applicable to the Bluetooth headset and USB headset. It is not applicable to CP920 IP phones.
Topic
To Next Page
Loading...
Need help?
General
