Yealink T21PE2 User Manual

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
178
The following table lists the parameters you can use to configure EDK.
Parameter features.enhanced_dss_keys.enable <y0000000000xx>.cfg
Description It enables or disables the Enhanced DSS Keys (EDK) feature.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter edk.id_mode.enable <y0000000000xx>.cfg
Description
It enables or disables to view the softkey or menu item ID by long pressing the Volume Up key for three
seconds on any screen.
Note: The menu item ID is displayed on the status bar of the phone. Long pressing the Volume Up key
again for three seconds to exit. It works only if “features.enhanced_dss_keys.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 0
EDK List Configuration
Using the Enhanced DSS Keys (EDK) List parameters to define a macro is useful when defining more than one soft key
or DSS key.
The following table lists the parameters you can use to configure EDK list.
Parameter
edk.edklist.X.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables Enhanced DSS Keys (EDK) macro X.
Note: It works only if “features.enhanced_dss_keys.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter
edk.edklist.X.mname
[1]
<y0000000000xx>.cfg
Description
It configures the unique identifier used by the soft key or DSS key configuration to reference the
enhanced DSS keys entry for macro X.
It cannot start with a digit. This parameter must have a value, it cannot be left blank.
Example:

Yealink T21PE2 Specifications

General

Brand	Yealink
Model	T21PE2
Category	IP Phone
Language	English