Yealink T21PE2 User Manual

Phone Customization
151
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Features->Notification Popups->Display Forward Call Popup
Parameter features.text_message_popup.enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to pop up the message when it receives a new text message.
Note: It works only if “features.text_message.enable” is set to 1. It is not applicable to CP920 IP phones.
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Features->Notification Popups->Display Text Message Popup
Power LED Indicator
Power LED indicator indicates power status and phone status. It is not applicable to CP920 IP phones.
You can configure the power LED indicator behavior in the following scenarios:
l The IP phone receives an incoming call
l The IP phone receives a voice mail or a text message
l A call is muted
l A call is placed on hold or is held
l The IP phone is busy
l The IP phone misses a call
Topic
Power LED Indicator Configuration
Power LED Indicator Configuration
The following table lists the parameters you can use to configure power LED indicator.
Parameter phone_setting.common_power_led_enable <y0000000000xx>.cfg
Descrip-
tion
It enables or disables the power LED indicator to be turned on.
Note: It is not applicable to CP920 IP phones.
Permitted
Values
For
T54S/T52S/T48S/T48G/T46S/T46G/T42G/T42S/T41P/T41S/T40P/T40G/T29G/T27G/T23P/T23G/T-
21(P) E2 IP phones:
0-Disabled (power LED indicator is off)
1-Enabled (power LED indicator glows red)
For T19(P) E2 IP phones:
0-Disabled (power LED indicator is off)
1-Enabled (power LED indicator glows yellow)

Yealink T21PE2 Specifications

General

Brand	Yealink
Model	T21PE2
Category	IP Phone
Language	English