Name: Yealink T21PE2
Brand: Yealink
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Phone Provisioning

Attributes Description

Note: Overwrite mode can only be used in boot files. If a boot file is used but “over-

write_mode” is not configured, the overwrite mode is enabled by default.

specific_model.excluded_mode

Enable or disable the exclude mode. The exclude mode applies to the con-

figuration files specified in the boot file.

0-Disabled (Append Mode), the phone downloads its own model-specific con-

figuration files, and downloads other model-unspecified configuration files.

1-Enabled (Exclude Mode), the phone attempts to download its own model-spe-

cific configuration files; if there are no own model-specific configuration files

found on the server, it downloads model-unspecified configuration files.

Note: Exclude mode can only be used in boot files. If a boot file is used but “spe-

cific_model.excluded_mode” is not configured, the exclude mode is disabled by

default.

Tip

The line beginning with “#” is considered to be a comment. You can use “#” to make any comment in the boot file.

Customizing a Boot File

Procedure

1. Open a boot template file.

2. To add a configuration file, add include:config <> or include:config “” to the file. Each starts on a separate line.

3. Specify a configuration file for downloading.

For example:

include:config <configure/sip.cfg>

include:config “http://10.2.5.206/configure/account.cfg”

include:config “http://10.2.5.206/configure/dialplan.cfg”

4. To specify configuration files for specific phone models, add specific phone models in front of include:config <>

or include:config “”. Multiple phone model names are separated by commas.

For example:

[T46S, T48S]include:config <configure/sip.cfg>

[T23G]include:config “http://10.2.5.206/configure/account.cfg”

## file sip.cfg only applies to T46S and T48S phones, file account.cfg only applies to T23G phones

5. Specify the overwrite mode and exclude mode.

For example:

overwrite_mode = 1

specific_model.excluded_mode = 1

6. Save the boot file and place it on the provisioning server.

Yealink T21PE2 User Manual

Questions and Answers: